Code S.6265W MICROSKILL ROUND|Simes S.p.A.

S.6265N

S.6265H

Technical data

picture

dimensions

Anthracite Grey

Detailed technical drawing

.01

.14

.24

PRODUCT DESCRIPTION

LUMINAIRE TYPE
Wall mounted luminaire. IP rating IP 65

MATERIAL CHARACTERISTICS
Aluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. Steel screws treated with an advanced anticorrosive coating. Silicone Gaskets. Extra-resistant Painting Process:
Extra-resistant exterior coating. Product suitable for applications in high-humidity environments, C5 ZONE (according to UNI EN ISO 9223:2012).
Mechanical resistance IK 08

LIGHTING PERFORMANCE
Toughened glass diffuser. LOR --

WIRING
MINISKILL is supplied with a pre-wired 5m H05RN-F cable. Isolation: CLASS III . Available colours: White (cod.01), Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 0.7371 Kg Glow Wire test: --
LED module included

SKILL REGISTERED DESIGN

This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.

This product contains a light source of energy efficiency class (EPREL - European Product Registry for Energy Labelling): D.

LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

WARRANTY
All items produced from 01/01/2026 onwards are covered by a 5 (five)-year warranty against manufacturing and conformity defects, in accordance with the terms and limits set out in the manufacturer’s official documentation. For full details, exclusions and warranty activation procedures, please refer to the following link: www.simes.it/warranty

MICROSKILL ROUND

Art. S.6265W

MODULE LED 3000K

NEW
Product is expected to be available from December 2026

Light Source Technical Data

Light source type:	LED
Colour temperature:	3000K
Rated luminaire luminous flux:	100lm
Rated luminaire power:	1.6W
Luminaire efficacy:	63lm/W
ULR:	4%
CIE Flux Code:	35 71 93 96 100
Color Rendering Index:	CRI 90
Standard Deviation Color Matching:	MacAdam step 3

Power Supply Technical Data

Voltage (DC): See the SIMES power supply accessories list on the following pages	24Vdc
Dimmable:	PWM

Temperature and life time Technical Data

LED Lifetime:	L80 B10 70.000h Ta 25°C L80 B10 50.000h Ta 40°C
Lifespan of the LUMINAIRE:	min. 70.000h Ta 25°C min. 50.000h Ta 40°C
Performance ambient temperature:	Tq 25°C
Operating ambient temperature range:	da -20°C a +50°C
Storage temperature range:	da -20°C a +60°C

Technical Installation Data

Electrical insulation class:	III
Protection class IP:	IP65
Mechanical resistance:	IK08
Weight:	0.7371Kg
Power cable:	5m - H05RN-F

WARRANTY

All Simes products are covered by an extended 5-year warranty. For terms and conditions, see www.simes.it/warranty

Accessories

Base for surface application

S.4330
FIXING WALL LIGHTS ACCESSORY ON INSULATION PANELS

Mounting bracket for insulated walls with insulation thickness from 50 mm to 200 mm. Maximum load capacity: 4 kg Maximum projection: 180 mm Luminaire mounting plate: 119 × 119 mm NB: Multiple accessories can be positioned side by side to create a larger mounting surface for the light fixture. It is therefore recommended to check the installation instructions for each individual light fixture to determine the exact dimensions of its mounting surface.

S.4331
FIXING XL WALL LIGHTS ACCESSORY ON INSULATION PANELS

Mounting bracket for insulated walls with insulation thickness from 50 mm to 200 mm. Maximum load capacity: 4 kg Maximum projection: 180 mm Luminaire mounting plate: 238x238mm

Remoted power supply

S.2400
POWER SUPPLY NOT DIMMABLE 10-35W 230Vac/24Vdc IP20

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 140 x 43 x 30 mm

S.2401
POWER SUPPLY NOT DIMMABLE 18-60W 230Vac/24Vdc IP20

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 225 x 43 x 29,8 mm

S.2405
POWER SUPPLY NOT DIMMABLE 0-60W 230Vac/24Vdc IP67

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 150 x 53 x 35 mm

S.2406
POWER SUPPLY NOT DIMMABLE 0-90W 230Vac/24Vdc IP67

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 171 x 63 x 37,5 mm

S.2407
POWER SUPPLY NOT DIMMABLE 0-14,4W 230Vac/24Vdc IP67

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV Dimensions: 70 x 38 x 25 mm.

S.2433
POWER SUPPLY NOT DIMMABLE 0-36W 230Vac/24Vdc IP67

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV Dimensions: 112 x 38 x 25 mm.

S.2445
POWER SUPPLY NOT DIMMABLE 0-120W 230Vac/24Vdc IP67

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 191 x 63 x 37,5 mm

S.2446
POWER SUPPLY NOT DIMMABLE 0-320W 230Vac/24Vdc IP67

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS I SELV Dimensions: 252 x 90 x 43 mm

S.3425
POWER SUPPLY NOT DIMMABLE 230Vac/24Vdc 1-8W IP54

It can be housed directly in the recessed box of MINISKILL round, square and vertical flush versions. (To be wired into the recessed box ensuring adequate IP protection). Dimensions : 54mm x 31mm x h 21mm

S.3664
JUNCTION BOX WITH NOT DIMMABLE POWER SUPPLY 0-36W 240V/24Vdc

IP65/67 power supply for: N°4 Micropool LED* o N°1 Minipool LED o N°1 Pool LED maximum load capacity 500Kg Dimensions 200mmx200mmx220mm *= require 2 x S.3670 additional cable gland

S.3665
JUNCTION BOX WITH NOT DIMMABLE POWER SUPPLY 0-90W 240V/24Vdc

IP65/67 power supply for: N°5 Micropool LED** o N°4 Minipool LED* o N°2 Pool LED maximum load capacity 500Kg Dimensions 300mmx300mmx230mm ** = require 3 x S.3670 additional cable gland * = require 2 x S.3670 additional cable gland

S.2415
POWER SUPPLY DIMMABLE 230Vac/24Vdc 0-24W 244Hz IP67

Dimmable DALI2 for monochromatic LED 0-24W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV PWM Frequency : 244Hz Dimensions 185 x 35x 33mm

S.2419
POWER SUPPLY DIMMABLE DALI2, PUSH DIM 0-36W 230Vac/24Vdc 3,6KHz IP20

Dimmable DALI2, PUSH DIM for monochromatic LED 0-36W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP20 CLASS II SELV Dimensions 210mmx43mmx30mm PWM Frequency : <3,6KHz

S.2426
POWER SUPPLY DIMMABLE DALI 2 0-120W 230Vac/24Vdc 2,5KHz IP67

Dimmable DALI 2 for monochromatic LED 0-120W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV PWM Frequency : 2,5KHz Dimensions 191 x 63x 37,5mm NB: not suitable for Family products NANOLED STAINLESS STEEL

S.2429
POWER SUPPLY DIMMABLE DALI2, PUSH DIM 0-75W 230Vac/24Vdc 3,6KHz IP20

Dimmable DALI2, PUSH DIM for monochromatic LED 0-75W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP20 CLASS II SELV Dimensions 293mmx43mmx30mm PWM Frequency : <3,6KHz

S.2447
POWER SUPPLY DALI2 0-200W 230Vac/24Vdc

Power supply for monochromatic LED 0-200W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV Dimensions 195x68x39mm

S.2449
POWER SUPPLY DIMMABLE DALI2, PUSH DIM 0-100W 230Vac/24Vdc 3,6KHz IP20

Dimmable DALI2, PUSH DIM for monochromatic LED 0-100W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP20 CLASS II SELV Dimensions 293mmx43mmx30mm PWM Frequency : <3,6KHz

S.3442
POWER SUPPLY DIMMABLE DALI2, PUSH DIM, 0/0-10V 230Vac/24Vdc or 230Vac/150-900mA 0-22W IP20

Dimmable DALI2, PUSH DIM, 1/0-10V for monochromatic LED 0-22W 230Vac/24Vdc or 8,1-25W 230Vac/150-900mA (Vout 2~54Vdc) The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 110mm x52mm x22mm IP20 CLASS II

S.3447
POWER SUPPLY DIMMABLE DALI2, PUSH DIM, 230Vac/24Vdc 0-30W IP67

Dimmable DALI2, PUSH DIM for monochromatic LED 0-30W 230Vac/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 250mm x30mm x21mm IP67 CLASSE I

S.3448
POWER SUPPLY DIMMABLE DALI2, PUSH DIM, 230Vac/24Vdc 0-60W IP67

Dimmable DALI2, PUSH DIM for monochromatic LED 0-60W 230Vac/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 275mm x30mm x21mm IP67 CLASSE I

S.3449
POWER SUPPLY DIMMABLE DALI2, PUSH DIM, 230Vac/24Vdc 0-100W IP67

Dimmable DALI2, PUSH DIM for monochromatic LED 0-100W 230Vac/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 305mm x30mm x21mm IP67 CLASSE I

S.2427
POWER SUPPLY DIMMABLE 1-10V0- 60W 230Vac/24Vdc 1,47KHz IP67

Dimmable 1-10V for monochromatic LED 0-60W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV PWM Frequency : 1,47KHz Dimensions 150x53x35mm NB: not suitable for Family products NANOLED STAINLESS-STEEL

S.2411
POWER SUPPLY 0/1-10V 230V/700mA 17W o 230V/24V 15W IP68

230V/700mA Maximum power consumption: 17W or 230V/24V Frequency PWM : 240Hz Maximum power consumption: 0-15W Dimensions 122mmx33mmx26mm IP68 SELV CLASS II Warning!!! Always check the minimum Forward voltage (Vf min) of the fixtures that will be connected to this driver.

S.2438
POWER SUPPLY 230V/150mA-900mA 8,1-25W o 230Vac/24Vdc 0-22W 240Hz DALI2 DIMMABLE IN BOX IP67

DALI2 DIMMABLE MULTI-POWER SUPPLY 230V/150mA-900mA Maximum power consumption: 8,1-25W or 0-22W 230Vac/24Vdc Dimensions 175,5mmx86,5mmx43mm PWM Frequency : 240Hz IP67 CLASS II SELV NB: not suitable for Family products NANOLED STAINLESS STEEL Warning!!! Always check the minimum Forward voltage (Vf min) of the fixtures that will be connected to this driver.

Dimmer

S.3437
DIMMER DALI2 / PUSH 1-10V IP20

The following devices/interfaces are used to control the color and brightness of the Monochromatic LED through DALI2 / PUSH 1-10V signal. These devices need a 24Vdc power supply Not Dimmable (type S.2405, S.2406, S.2445 and S.2446) and must be placed between the 24Vdc power supply and the luminaires. Therefore choose a 24V power supply based on the maximum power used of the luminaires up to a maximum of 144W. IP20 Dimensioni 132mmx22mmx19mm

Junction box

S.3660
JUNCTION BOX IP65/67*

Junction box with cable glands for 3 cables IN (possibility of 3 more cables IN with S.3670 accessories) Maximum load capacity 500Kg Dimensions 300mmx300mmx230mm

Connectors

S.3670
1 ADDITIONAL CABLE GLAND

Required for the connection of over 2 luminaires to the junction box S.3660 / power supply S.3664, S.3665, S.3667, S.3668.

Documentation