LUMINAIRE TYPE
Plug-in Down-light luminaire to be exclusively installed on light rod HIGHLIGHTER. IP rating IP 65
MATERIAL CHARACTERISTICS
Aluminium die cast housing in EN AB-44100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. 2 mm thick front trim in Stainless Steel - Grade AISI 316L with 2,5 -3% molybdenum content, with high resistance against corrosion. Steel screws treated with an advanced anticorrosive coating. Pre treated Silicone Gaskets.
Extra-resistant Painting Process:
Extra-resistant exterior coating. Product suitable for applications in high-humidity environments, C5 ZONE (according to UNI EN ISO 9223:2012).
The 4 mm thick tempered glass diffuser is fixed to the external body by a silicon resin and positioned flush with the support ring. Mechanical resistance IK 07
LIGHTING PERFORMANCE
Rearward optics, guarantees a total absence of glare and an excellent distribution of the beam on the ground. The glass is properly interposed between the internal reflectors and the external cowels for even more professional visual comfort. Clear toughened glass 4 mm thick.
INSTALLATION AND MAINTENANCE
The mechanical and electrical connection of all plug-in products to the rod is via a double installation system:
- the two metal clips hook the anodised aluminium extrusion externally and permanently ensure the product plug-in to the light rod;
- the 4 pins, necessary for the 24V electrical connection, pierce the silicone strip housed in the extrusion and intercept a dedicated line that has an independent power line from the rod itself.
The painted aluminium veils complete the system by hiding the fastening clips external to the extrusion. The end caps create an aesthetic and functional closure as they become an additional safety element for the joining of the components.
WIRING
Constant voltage 24V DC (with frequency PWM <600Hz) from the electrical connection to the HIGHLIGHTER lighting profile. Plug-in fixtures protected against the reverse polarity. Isolation: CLASS III . Available colours: White (cod.01), Black (cod.09). Weight: 0.5818 Kg Glow Wire test: --
LED module included
CEILING PLUG-IN PATENTED, REGISTERED DESIGN
This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.This product contains a light source of energy efficiency class (EPREL - European Product Registry for Energy Labelling): E.
LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.DARK SKY FRIENDLYThis luminaire is designed according to the principles of light pollution reduction: zero light emission above 90°, color temperature 2700K/3000K, and full shielding. It is not a DarkSky Approved certified product, but it complies with the main criteria of the International Dark-Sky Association (IDA).
WARRANTYAll items produced from 01/01/2026 onwards are covered by a 5 (five)-year warranty against manufacturing and conformity defects, in accordance with the terms and limits set out in the manufacturer’s official documentation. For full details, exclusions and warranty activation procedures, please refer to the following link: www.simes.it/warranty
S.9050N
Installation video guide