Item no longer in the catalogue.

CEILING SURFACE MOUNTED
MEGASLOT DOWNLIGHT
S.3929
HIT-CRI 150W 14000lm G12 230-240Vac ON-OFF

Rated module luminous flux:: 14000lm
Rated luminaire luminous flux: : 8400lm
Rated module power: : 150W
Rated luminaire power: : 149W
Luminaire efficacy: : 56lm/W
Voltage (AC): : 230-240Vac
Frequency (AC): : 50Hz
Dimmable: : NOT DIMMABLE (ON-OFF)
Electrical insulation class: : I
Protection class IP: : IP65
Mechanical resistance: : IK08
CE 

LUMINAIRE TYPE
Down-light luminaire. IP rating IP 65
MATERIAL CHARACTERISTICS
Aluminium die cast housing in EN AB-47100 (low copper content) and extruded EN AW-6060 with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process
1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 08
LIGHTING PERFORMANCE
Reflector in 99.98% pure anodized aluminium. Clear toughened glass 12 mm thick. Lamp  adjustable ±15° position. LOR 60% 
WIRING
Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 11.3 Kg Glow Wire test: 850°C
Lamp not included.

ELECTRONIC EQUIPMENT SENSITIVE TO OVERVOLTAGE.We recommend installing surge protection devices "SPD" in the electrical system. Protection devices prevent the intensity of these phenomena’s, protecting the appliances from the risk of being damaged and extending the lifespan. Outdoor luminaires are subject to all types of permanent, temporary, or transient electrical disturbances. Such disturbances can create permanent damage or failure affecting its performance and durability. The surge protection device (supplied by SIMES) is utilized to limit the destructive effect of these phenomena. We suggest that each luminaire must be connected to one protection device at not more than 10m away. For correct coordination of the protections, a surge protection device must also be provided inside the electrical panel of the system (the selection of this device must be carried out from the electrical designer and is not supplied by SIMES).