Version available on request without price surcharge.

SPOTLIGHTS
MINIPOINTER DIGITAL BEAM
S.2705N
1 module LED 4000K 48Vdc 

Rated module luminous flux:: 1428lm
Rated luminaire luminous flux: : 954lm
Rated module power: : 12.8W
Rated luminaire power: : 16.4W
Luminaire efficacy: : 58lm/W
Voltage (DC): 
See the SIMES power supply accessories list on the following pages: 48Vdc
Electrical insulation class: : III
Protection class IP: : IP66
Mechanical resistance: : IK09
CE 

LUMINAIRE TYPE
Projector. IP rating IP 66
MATERIAL CHARACTERISTICS
Die-cast EN AB-44300 aluminium housing with high corrosion resistance.
Stone wash surface treatment prior to painting process. Stainless steel Allen screws with insulating treatment against galvanic corrosion. Silicone Gaskets.
Extra-resistant Painting Process: 
C5 coating (according to UNI EN ISO 9223:2012), extra-resistant, with a thickness between 80 and 120 microns depending on the colour finish. Suitable for applications in environments with high humidity and/or marine exposure. 
Mechanical resistance IK 09
LIGHTING PERFORMANCE
LensVectorTM optic technology for digital control of the light beam from 10° to 50°. The Digital Beam technology allows also the control of more light fittings according to the desired scenario to easily recall preset light scenes and transform an outdoor environment adapting it to needs and moments.  Clear toughened glass 5mm thick. LOR -- 
INSTALLATION AND MAINTENANCE
The tempered front glass diffuser is fixed externally to the fitting through silicon resin, perfectly flush with the front ring. Water and dirt deposits that can disturb the lighting performance of the projector can easily flow away. 
WIRING
Luminaire supplied with neoprene 0,5m H05RN-F cable and connector. To ensure optimal installation, it is recommended to use the 3-way Connector (type S.5507) for the electrical connection between the DALI signal cable and the 48V Power Supply to the Digital Beam luminaire. Isolation: CLASS III . Available colours: Anthracite grey (cod.24). Weight: 3.74 Kg Glow Wire test: --
LED module included
REGISTERED DESIGN
This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.
LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.


WARRANTY
All items produced from 01/01/2026 onwards are covered by a 5 (five)-year warranty against manufacturing and conformity defects, in accordance with the terms and limits set out in the manufacturer’s official documentation. For full details, exclusions and warranty activation procedures, please refer to the following link: www.simes.it/warranty