Item no longer in the catalogue.

LINEAR EFFECTS
CONTINUOUS ROD COMFORT RECESSED
S.2371N
module LED 4000K 24Vdc DIMMABLE PWM

Rated module luminous flux:: 720lm
Rated luminaire luminous flux: : 659lm
Rated luminaire power: : 11.5W
Luminaire efficacy: : 57lm/W
Voltage (DC): 
See the SIMES power supply accessories list on the following pages: 24Vdc
Dimmable: : PWM
Electrical insulation class: : III
Protection class IP: : IP65
Mechanical resistance: : IK08
CE 

LUMINAIRE TYPE
Wall or Ceiling recessed luminaire. IP rating IP 65
MATERIAL CHARACTERISTICS
Fixing base in extruded anodized EN AW-6060 aluminium housing (copper free) with high corrosion resistance. Transparent silicone end caps for LED circuit and aluminium EN AW-47100 (Minimal) or EN AW-6060 (Comfort) caps for the extruded parts. Mechanical resistance IK 08 
LIGHTING PERFORMANCE
Continuous Rod is available in 4 different light source colors (Yellow, Red, Green and Blue LEDs colours) on request with surcharge. Continuous light source made of opal silicone. Lamp  fixed position. LOR -- 
INSTALLATION AND MANTEINANCE
Cutting off and continuity: The light source and the aluminium profile of Continuous Rod can be easily cut off and aligned continuously to reach the desired length. The light source is delivered in a continuous length of max. 3m and can be cut off every 5cm. The aluminium profile comes in lengths of 1m, 2m or 3m, alignable between themselves in a continous and linear manner using the specific joint delivered with the luminaire (exception made for the recessed brickwall installation with the recessed housing).
Suitable for installation in drywalls, complete with fixation clips. 
Recessed ceiling or wall mount in brickwork with recessed housing: To rightly install the luminaire luminaire in walls or in masonry ceilings use the recessed housing made of anodized aluminium. Important note: Unlike the installation in drywalls where a light effect of more than 3m can be achieved, the recessed installation with the housing is limited to 3m.
WIRING
Supply 5m cable section type PVC. Isolation: CLASS III . Available colours: White (cod.01), Aluminium grey (cod.14). Weight: 1.77 Kg Glow Wire test: --
LED module included
This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.
LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.