|Mounting instruction sheet|
|* Specification sheet|
|* Txt only Specs sheet|
|* Autocad DXF|
|* Aluminium grey (.14)|
|* Dimensional drawing|
|download available only
for registered users.
|LINEAR FRAME SHORT|
S.5971T16 8W G5 450lm
Rated luminaire luminous flux: 126lm
Rated input power: 9.3W
Luminaire efficacy: 14lm/W (LOR: 28%)Electronic ballast 220÷240V 50Hz
Wall mounted luminaire. IP rating IP 65
Die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process
1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09 Maximum load capacity --
Reflector in 99.98% pure anodized aluminium . transparent polycarbonate diffuser 10 mm thick. Lamp fixed position. LOR 28% Compact electronic ballast to guarantee better lamp stability, lifetime and reduced energy consumption.
INSTALLATION AND MANTEINANCE
To install the luminaire, attach two aluminium mounting brackets to the wall. Use two dowels to fix the unit, which is hung on the mounting brackets. The electric cable assembly block is situated on the rear of the device. Through wiring is possible with M20 (Ø 7÷13 mm) cable glands.
Double cable entries for M20 cable glands. Isolation: CLASS II . Available colours: Aluminium grey (cod.14). Weight: 2.3 Kg Glow Wire test: 750°C
This luminaire is compatible with bulbs of the energy classes: . The luminaire is sold with a bulb of the energy class: (Regulation UE 874/2012).
On request the fittings could be provided with electronic ballast which operate both on AC ( 50/60Hz ), both on DC ( 0Hz ) voltage.