|Mounting instruction sheet|
|* Specification sheet|
|* Txt only Specs sheet|
|* Autocad DXF|
|* 3ds Max|
|* 3D CAD|
|* Stainless steel (.19)|
|* Dimensional drawing|
|download available only
for registered users.
|MICROPLUG LED ROUND FLAT DIFFUSER|
S.4570MODULES LED 6000K 230V CRI 75
Rated luminaire luminous flux: 40lm
Rated input power: 1W
Luminaire efficacy: 40lm/W220÷240V 50/60Hz
Wall mounted luminaire . IP rating IP 65
Polycarbonate housing. Stainless steel AISI 316L front trim3 mm thick. Zinc alloy back-ring. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process
1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Improved protection for Marine applications. Mechanical resistance of diffuser IK 09
Methacrylate diffuser. LOR --
INSTALLATION AND MAINTENANCE
MICROPLUG comes with a polypropylene recessing box that should be installed flush to the wall. The frontal trim is made of AISI 316L stainless steel. Its clip fastening system, which keeps screws invisible on the assembled luminaire, enhances the product's minimalist design. All MICROPLUG luminaires are supplied with two clips that allow an easy installation for floating walls and ceiling mounting.Wall thickness must be between 5 and 20 mm. Diameter of the hole must be: MICROPLUG ROUND Ø60 mm, MICROPLUG SQUARE 60x60 mm, MICROPLUG RECTANGULAR 57x94 mm.
Supply 1m cable section type H07RN-F. Isolation: CLASS II . Available colours: Stainless steel (cod.19). Weight: 0.3 Kg Glow Wire test: 850°C
L.E.D circuit included.
This luminaire contains built-in LED modules with energy class: . The LED modules cannot be changed in the luminaire (Regulation UE 874/2012).
LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C.
Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded.